- SHOP
- >
- GUITAR AMPLIFIER VALVE HEADS
- >
- NEAR NEW | STORE DEMO | USED | CLASSIC
- >
- PEAVEY® 5150™MkI EVH™ 'BLOCK LETTER Series' 120w 2-Channel All Valve Guitar Amplifier Head ★ ORIGINAL USED | RARE BRUTAL CLASSIC ★ FREE FREIGHT | 1YR WARRANTY | LIMITLESS LAYBY | PAYPAL | NO INTEREST EVER Finance Available
PEAVEY® 5150™MkI EVH™ 'BLOCK LETTER Series' 120w 2-Channel All Valve Guitar Amplifier Head ★ ORIGINAL USED | RARE BRUTAL CLASSIC ★ FREE FREIGHT | 1YR WARRANTY | LIMITLESS LAYBY | PAYPAL | NO INTEREST EVER Finance Available
SKU:
NTM-000103-B
A$3,995.00
A$3,395.00
A$3,395.00
On Sale
Unavailable
per item
PEAVEY® 5150™MkI EVH™ Eddie Van Halen 'BLOCK LETTER Series' METAL 120watt 16/8/4-Ohm Switchable 2-Channel - 240volt Australian All Tube Valve Electric Guitar Amplifier Head w/- 4 x G6L6 Power Tubes, 6 x 12AX7 Pre-Amp Tubes, Ch1 Pre & Post Gain plus Bright & Crunch Switch, Ch 2 Pre & Post Gain, as well as the simplicity of Shared 3-Band Active EQ Control & Presence/Resonance Control Sets (Psst! It's the secret of the focused sound), Effects Loop, Pre-Amp Output, Bias Test Point, Peavey® 2-Channel Multi-Purpose 2-Button Stereo Footswitch (Labelled 1 & 2 with LED's & 15ft Right Angle ¼" Inch Cable (Included if originally donored). The undisputed go-to guitar amp series for scores of metal bands. Based on the unrepeatably awesome Eddie Van Halen Peavey® 5150™I & II and the Peavey® JSX™ & Peavey® XXXII™ heads.
20/03/2024 NOTE: OUR DONOR ADVISES THIS VERY EARLY UNIT IS ONE OF THE BEST MOST BRUTAL THAT HE EVER OWNED - SERIAL NUMBER: 00-05557001
USA Made | Durable Construction | Brutal Sound | 240vAU
★ ORIGINAL USED | RARE BRUTAL CLASSIC ★ FREE FREIGHT | 1-YEAR Classic USED WARRANTY | LIMITLESS LAYBY | PAYPAL & MORE PAYMENT OPTIONS | NO INTEREST EVER Finance available.
∎ ORIGINAL USED | RARE CLASSIC - AWESOME U.S.A. MADE CLASSIC (Minimal Stock - 240v)
______________________________________________________________________
AN ABSOLUTE TOTAL MONSTER
An absolute total monster. The Peavey® 5150™MkI is the result of an extensive research and development project with guitar legend Edward Van Halen to produce the ultimate ROCK & ROLL guitar amplifier. You’re ready to experience super rock crunch, harmonic-rich sustain, and screaming metal drive like you’ve never heard from another amp.
______________________________________________________________________
THE PEAVEY® 5150™MkI AMP
The Uncontested Sound Of Metal. It's the tone that made history.
The 5150™ lets you experience 120W of smooth crunch and dense harmonics. 5 - 12AX7s in the preamp and 4 - 6L6s in the power amp provide all the gain and tone you'll need. Includes high and low gain inputs, and the 2 channel preamp is switchable on the front panel or footswitch. The rhythm channel features pre/post gain controls and bright/crunch switches. Lead channel has controls for pre/post gain only. Channels share 3-band EQ, presence, and resonance controls. Switchable post EQ effects loop. 16, 8, or 4 ohms with preamp output. Footswitch included.
The 5150™ series amplifiers and enclosures are the result of extensive research and development with guitar legend Edward Van Halen to produce the ultimate products for guitarists. With the 5150™MkI and 5150™MkII heads, you'll experience super rock crunch, harmonic-rich sustain, and screaming drive like you've never heard before. The production models were identical to those Van Halen used when recording & touring.
Peavey® 5150™MkI 240v 2-Channel - 120watt Head OPERATING MANUAL .PDF
https://assets.peavey.com/literature/manuals/80302108.pdf
______________________________________________________________________
AMP HEAD OVERVIEW:
▸ Six 12AX7 Pre-Amp & Four 6L6GC Power-Amp Tubes
▸ 120watts RMS into 16, 8 or 4-Ohm Switchable
▸ Ch1 Rhythm / Ch2 Lead Footswitchable Channel Select
▸ Rhythm Channel Footswitchable Bright-to-Crunch-Boost
▸ Rhythm Channel Bright Switch
▸ Three-Band EQ (Across Both Channels)
▸ Pre-Amp Output
▸ Effects Loop
▸ Bias Test Point
▸ Footswitch* (*Included - if originally donored)
▸ 240volts Australian Mains Power
______________________________________________________________________
SPECIFICATIONS:
▸ Amp Power: 120watts RMS
▸ Ohmage: 16, 8 or 4-Ohm Switchable
▸ Vacuum Valve Tubes: Four 6L6 Power-Amp Tubes & Six 12AX7 Pre-Amp Tubes
▸ Graphic Equalizer: Shared 3-Band Active EQ Controls on Each Channel (Rhythm & Lead) Bass / Middle / Treble across Channels
▸ Attitude: Shared Resonance & Presence Controls across Channels
▸ Rhythm Channel: Pre-Gain & Post-Gain Controls, as well as Bright/Crunch Switches
▸ Lead Channel: Pre-Gain & Post-Gain Controls
▸ Front Input: 1 x High Gain Guitar Input Socket (¼" / 6.5mm TRS Mono Phono Jack) Requires Electric Guitar Instrument Cable
▸ Front Input: 1 x High Normal Guitar Input Socket (¼" / 6.5mm TRS Mono Phono Jack) Requires Electric Guitar Instrument Cable
▸ Rear Outputs (Speaker): 120w RMS / 44v RMS @ 4Ω Min. (2 x ¼" / 6.5mm TRS Phono Jacks) Requires Requires Speaker Cables
▸ Rear Output (Pre-Speaker): Pre-Amp Output (¼" / 6.5mm TRS Phono Jack) Requires Speaker Cable
▸ Rear Out/Inputs: Effects Loop Send & Return (2 x ¼" / 6.5mm TRS Phono Jacks) Requires Electric Guitar Instrument Cables
▸ Other Rear: Bias Test Point & GND Switch
▸ Voltage Input: 240voltAC IEC Input Socket to Type "I" Wall Socket (220v-230v / 240v∿ / 50-60Hz / 400w) Cable Included
▸ Footswitch: Peavey® 2-Channel Multi-Purpose 2-Button Stereo Footswitch (Labelled 1 & 2 with LED's & 15ft Right Angle ¼" Inch Cable)
▸ Fuse: F3.15A / 250V
▸ MPN: 00716160
______________________________________________________________________
MEASUREMENTS:
Unpacked:
Weight - 48.30 lb (21.91 kg)
Width - 26.5" (67 cm)
Height - 10.3" (26 cm)
Depth - 11.9" (30 cm)
Packed:
Weight - 57.00 lb (25.85 kg)
Width - 13.25" (33.5 cm)
Height - 28.75" (73 cm)
Depth - 14" (35.5 cm)
______________________________________________________________________
PEAVEY® - We Are Innovation. Amplified.
Driven by an unmatched legacy of innovation and a total dedication to quality and reliability, Peavey Electronics embodies the pursuit of perfection in music and audio. It's our unifying spirit. It's proven - and it continues today.
For nearly five decades, Peavey has blazed its own path toward musical perfection. Founded by Hartley Peavey in 1965 as a one-man shop, today Peavey Electronics Corporation is one of the largest makers and suppliers of musical instruments, amplifiers and professional audio systems in the world—distributing more than 2,000 products to more than 130 countries.
Hartley has famously said, "In order to be better, by definition you must be different." What makes Peavey different is a commitment to approaching business with a unique vision, from product design to distribution to being the largest independently owned manufacturer in the business. His quest has led to more than 180 patents and innovations in the way we hear and play music.
Hartley Peavey is not only the visionary, lead engineer and chief executive, but also the lynch pin that connects a rich history to a bright future. And his founding principles of quality, reliability and innovation are still the focus of engineering and manufacturing operations that span continents and languages, customs and cultures.
______________________________________________________________________
PEAVEY ELECTRONICS - CORPORATION HISTORY
Company Perspectives
Since its founding in 1965, our company goal has always been to build the best products available while at the same time making them affordable through the use of the most modern computer-assisted design manufacturing methods available.
Company History
The Peavey Electronics Corporation, founded in 1965 by Hartley Peavey, is a major manufacturer of guitars, amplifiers, speakers, electronic keyboards, and other electronic audio-enhancement equipment. In 1993, the company, solely owned by Hartley, then chairman, and Melia Peavey, his wife and president of the company, had sales estimated at $210 million. Exports to more than a hundred countries accounted for an estimated 40 percent of sales. Peavey® Electronics, with more than 1,600 different products, is also the tenth largest manufacturer in Mississippi, with more than a million square feet of warehouse and manufacturing space in east-central Mississippi, including a 40-acre headquarters site known as Peavey City in Meridian. The company also has manufacturing operations in Foley, Alabama, and in Corby, England, and distribution centres in The Netherlands and Canada. Its chief competitor is Yamaha, the Japanese conglomerate. Founder Hartley Peavey, whose "hometown boy makes good" story made him a local legend in Mississippi, has been the recipient of numerous awards for entrepreneurship, including the "E Star" award for success in international markets from the U.S. Department of Commerce. He was also inducted into Hollywood's "Rock Walk of Fame" in 1990 for his contributions to rock 'n' roll music.
Musical Ambitions in the 1950s
Hartley Peavey grew up in Meridian, Mississippi, and had early aspirations of becoming a rock 'n' roll guitar player. As a teenager in the late 1950s, he worked in the Peavey Melody Music Store, owned by his father, J.B. "Mutt" Peavey, and tinkered with building amplifiers for local musicians. When, as he once confessed to Inc. magazine, he turned out to be a "pretty lousy guitarist," Peavey decided his future was in making amplifiers.
In 1965, after graduating from Mississippi State University with a degree in marketing and management, Peavey, then 23, took the remaining $8,000 in his college fund and formed Peavey® Electronics, working out of his parents' basement. As he later recalled in "Music and Sound's Greatest Hit," published by Peavey Electronics for its 25th anniversary: "I would build one (amplifier) a week, go out and sell it, come back and start on another one." The amplifiers were inscribed with the lightning bolt logo that Peavey had designed as a college freshman.
A year later, Peavey moved the business from the family's basement to an attic in the building that had housed his father's music store. By then, his father had sold the music store but still owned the building. Peavey also hired his first employee, a salesman, so he could concentrate on building amplifiers.
In the mid-1960s, however, there were many larger, better-known companies making amplifiers, and Peavey soon expanded into building public address systems to keep his young business afloat. In the company's 25th anniversary retrospective, Peavey explained that as "I travelled and talked to music dealers, I realised there was no shortage of instrument amplifiers. But if you wanted a PA system there were essentially only two available and both were expensive systems.... Most folks think I got into the music business with guitar amps. Not necessarily so!"
Staying in Meridian
By 1968, business was good enough that Peavey decided to borrow $17,500 to build a small "factory" in Meridian. Over the next five years, Peavey Electronics enlarged the building seven times, and having grown to more than 150 employees, in 1973 the company began construction on Plant #3, which would become its main manufacturing facility. To hire enough skilled employees, Peavey Electronics established training courses at Meridian Community College.
Over the years, Peavey was often asked about his decision to keep the company in Meridian. In 1985, he told Inc. that Mississippi "unfortunately runs dead last in everything. You don't have the skilled people you need, you don't have the suppliers, you don't have the access to the freight network.... Back in 1965, when I got into this, I was too damn dumb to know it couldn't be done." He went on to say that he had "lost count" of how often he wished he had built Peavey Electronics somewhere else. In a later interview with his hometown newspaper, The Meridian Star, Peavey explained, "What I tried to say in the Inc. article was that Mississippi presented many difficulties in starting a high-tech business. And some of these difficulties exist to this day." In 1982, the City of Meridian honoured its hometown industrialist by proclaiming April 21 as Hartley Peavey Day.
In the late 1980s, when the company was considering building its first U.S. manufacturing facility outside of Mississippi, then-Governor Ray Mabus worked with Peavey Electronics and Meridian Community College to create The Meridian Partnership, the first private-sector use of the Job Skills Education Program, a technology and basic-skills program originally developed by the U.S. Army. In the early 1990s, Peavey Electronics opened a 58,000-square-foot training centre, complete with its own recording studio, for its employees and more than 1,200 dealers. In 1993, Peavey told The News in Boca Raton, Florida, where he and his wife had a second home, "People ask me why Mississippi and I say, Where do you think rock 'n' roll was born?"
Vertical Integration in the 1970s
It was in the early 1970s that the company began the vertical integration that would make it unique among major electronic musical equipment manufacturers. Unable to purchase reliable speaker components for its high-power amplifiers, Peavey Electronics began making its own loudspeakers. Eventually, Peavey Electronics would build everything it needed for its musical instruments, from cabinets and metal work down to making its own circuit boards and running its own advertising agency.
In 1990, Peavey explained, "If somebody local had been able to subcontract for me the things I needed to build amplifiers, I would probably still be using subcontractors. We had to learn to make our own chassis, our own circuit boards, and eventually everything 'in-house.' And while we thought it was a tremendous disadvantage, and in many ways, it was, we discovered that it was the best thing that could have happened."
In the mid-1970s, Peavey Electronics also began manufacturing electric guitars, again more from necessity than design. Several leading electronic instrument companies were gobbled up by conglomerates during the 1960s, including Fender Musical Instruments, which was purchased by CBS in 1964. These companies, with their immense marketing power, began encouraging dealers to sell their guitars and amplifiers as a package deal, cutting into sales of Peavey amps.
As he had when he adopted solid-state components for his first amplifiers, Peavey embraced state-of-the-art technology to produce guitars at lower cost, becoming the first manufacturer to use computer-controlled machinery to turn out guitar bodies and precision parts. Years later, Peavey recalled, "When we announced that we were making guitar bodies on computer-controlled machinery, some of the most prominent names in the industry said, 'Impossible. Everybody knows you can't make guitars with a computer.' That was a rather simplistic attitude, we thought, because, in fact, we weren't making guitars on computers. We were using ...computer-controlled machines to make precision guitar parts to tolerances that heretofore manufacturers couldn't even think about approaching. Guitar makers are always talking about hand craftsmanship. What hand craftsmanship is, in many instances, is the ability to fit together parts that are produced with a lot of 'slop' in them."
In the early 1990s, Peavey Electronics would establish a Computer-Integrated Manufacturing (CIM) system to link and track all aspects of its manufacturing, and increasingly the company was using robotics in its assembly processes. The company, however, had an unofficial no-layoffs policy and employees whose jobs were eliminated by technology were retrained for other positions. In 1994, Jere Hess, then director of public relations, told The Meridian Star, "No one in this company has ever lost their job because of automation."
Twenty-Fifth Anniversary
When Peavey Electronics celebrated its 25th anniversary in 1990, The Meridian Star published a 40-page special edition to honour the company that had become the area's largest employer. The newspaper noted that Peavey Electronics created more than 1,000 new jobs in east-central Mississippi between 1980 and 1989, including more than 850 in the Meridian area, and 73 percent of all new manufacturing jobs in Lauderdale County. Among those saluting the company was Mayor Jimmy Kemp, who said, "Of course the obvious things you think about when somebody in your community employs 1,850 people is the enormous impact it has on your city, which is fantastic. I'd hate to think what we'd do without Peavey Electronics as far as our city is concerned." Peavey Electronics was then the tenth largest manufacturing employer in the state.
In 1991, Peavey Electronics was one of 20 companies selected by the U.S. Department of Commerce to participate in a five-year program designed to stimulate export of U.S. products to Japan. As part of the program, the Department of Commerce arranged meetings between heads of the U.S. companies and Japanese officials, including Prime Minister Toshiki Kaifu and Minister of International Trade and Industry Eiichi Nakao. Peavey Electronics, which first entered the Japanese market in the mid-1970s in a short-lived relationship with industrial giant Yamaha Corporation, also agreed to participate in at least one trade show a year in Japan. Although the company contracted with other distributor, Japan was never a significant market.
In 1991, President George Bush chose Peavey Electronics as the site to give a speech on economic growth. The Meridian Star noted, "Hoping to pump fresh air into his sagging popularity, President Bush hailed the success of Meridian's Peavey Electronics Co. as proof that Americans can excel in a worldwide economic battle." The newspaper also quoted Peavey as stating that the company's "one real goal, perhaps unreachable, is to become a $1 billion company." At the time, Peavey Electronics was reported in the local media to have sales approaching $500 million a year, although company executives said that figure was greatly exaggerated. As a matter of policy, the privately held company did not release financial information, but annual sales in the mid-1990s were generally believed to be about $200 million to $220 million.
______________________________________________________________________
A Brief History of Peavey Amplifiers –
A Legacy of Quality & Affordability
The story of how Peavey became one of the largest audio manufacturers in the world is one of humble beginnings and a well-deserved reputation for quality, value and innovation. Growing up as a guitar or bass player, you’ve probably owned or played your fair share of Peavey amps, since the company’s catalogue is so affordable, diverse and well distributed.
After graduating from Mississippi State in 1965, Hartley Peavey started his company above his father’s music store, building amps one at a time. Since then, Peavey has proven to be a pioneer in all facets of solid-state and tube-driven amplification, which has led to the design of some of the world’s best and best-selling amplifiers, including the Bandit and the 5150®.
Not only is the company passionate about sound, it is equally passionate about build quality and affordability. Peaveys are known for their innovative circuitry, being built like tanks and for being affordable enough for musicians at every level, across the globe.
Humble Beginnings
In 1961 Hartley Peavey made his first amplifier and adorned it with the instantly recognisable company logo, which he designed himself in high school. When he launched the company four years later, Peavey produced only two amplifiers: The Musician and Dyna Bass. Both models were high-wattage, solid-state amplifiers that included simple features for the working musician.
In 1973, Peavey began development on a series of vintage Fender Twin inspired amps, with 6L6 power tubes and two 6C10 pre-amp tubes. These amps had a different sonic signature than the Twin and had their own unique sound. Since solid state was all the rage back in the 1970s, later versions capitalized on new technology, which enabled the combination of solid-state pre-amps with tube power amps.
The vintage series was the precursor to the now popular all-tube Classic Series®, which features an EL84 power section that effectively combines classic Vox- and Fender-type tones in one convenient and versatile amp for use in many different styles of music.
Solid State Dominance
With solid state amps becoming increasingly popular in the ‘70s and early ‘80s, Peavey developed what is arguably its most famous solid-state amp: The Bandit®.
Conceived in 1980, the Bandit since has gone through many revisions and Bandit®s still are being produced today with Peavey’s own TransTube® technology. This innovative feature emulates the sound and feel of a tube amp using solid state power. Peavey accomplished this by modelling the overload characteristics of the amp and transformer as well as emulating the sound of asymmetrically clipping tubes.
Early model Bandits are instantly recognisable by their multi-coloured knobs and silver panels adorning the sides of the grill cloth. Varying in wattage over time, the Bandit has become a reliable tool in the solid-state amp lover’s arsenal.
More Gain for ‘80s Metal Players
When hair metal first hit in the ‘80s, players required more gain for new playing techniques, such as two-handed tapping and sweep picking. Marshall was ahead of the curve for this particular sound with the coveted JCM800 2203, but Peavey offered its take on that circuit with the Butcher and VTM series. Instead of Marshall's usual EL34 tubes, both series of Peavey amps used 6L6 power tubes, which yielded a darker sound and a less apparent upper-mid presence.
Many compare the VTM to a hot-rodded JCM800 and the Butcher to a normal JCM800, but even though these amps may share similar tonal characteristics, they are definitely their own beasts. These amps are extremely versatile and can be bought for much less than comparable competitors.
Modern Metal Mayhem
In the early ‘90s, more players began demanding even more gain, power and options, and Peavey moved to the front of the pack,via the three-channel Ultra Plus®, a currently undervalued amp.
The Ultra Plus® could cover any genre of music with its crisp-and-spanky clean channel for country; crunch channel for rock’s cutting mid-range; and ultra-channel for searing leads and metal riffs.
Using an active EQ section, the user could boost or cut any frequency with precision and dial in his own desired tone. Peavey seems to favour 6L6 power tubes, and at 120 watts this head could do the job for any situation. It was a precursor to the Triple XXX® series, which was a slightly modified version of the Ultra Plus, but it featured updated aesthetics, including a metal face plate akin to a Mesa Triple Rectifier. Peavey since has come out with the Triple XXX®II, which features switchable power tubes from the stock EL34s to 6L6s.
The Most Famous of Them All
The 5150® was unleashed in 1992 after a two-year collaboration between the creative minds of amp designer James Brown and guitarist Eddie Van Halen.
Featuring two channels, a 120-watt all-tube 6L6 power section and a shared EQ, the 5150® was able to produce a variety of rock and metal tones. The rhythm channel could be set clean or crunchy, but the lead channel is what this amp is famous for. With its super high-gain sound, it could be used for anything from tight and aggressive metal riffs to blistering lead tones. This led to the 5150®II with separate EQs for each channel, which made the amp even more versatile. In 2004, EVH parted ways with Peavey and the amp was re-branded as the 6505® and 6505®+ (also known as the 6505®Plus), along with the 6534™ and 6534™+ (also known as the 6534™Plus), which feature an EL34 power section for a more British flavour.
Since its creation, Peavey strives to make powerful, affordable amplifiers so that every musician can have the means to own one and the privilege to play through one.
______________________________________________________________________
We are the NSW Mid-North Coast Franchise Dealer for these (and more) quality musical instruments and equipment plus loads more guitar, drums, keyboard, recording, and live equipment brands
______________________________________________________________________
CONTACT US
N E W T O N E M U S I C & GUITAR TRAINING CENTRE
58 COMMERCE STREET | TAREE NSW 2430
(PH) 0 2 6 5 5 2 1 4 4 4 | (PH) 0 4 0 7 1 1 4 1 1 2
[email protected]
______________________________________________________________________
★For more than 25yrs N E W T O N E M U S I C we provide★
✓ FREE SHIPPING depot-to-depot to all states (except WA & NT).
✓ 3 YEAR Full Manufacturers WARRANTY on NEW items.
✓ 1 YEAR WARRANTY back to base NEAR NEW or USED items.
✓ LAYBY without time limits & receipts showing remaining balance.
✓ PAYPAL Safe & Secure Payment.
✓ CREDIT CARD phone MOTO & BPOINT payments accepted.
✓ BANK DEPOSIT to:
Groundwater's Guitar School Inc
58 Commerce Street, Taree NSW 2430
( BSB: 0 6 2 6 0 3 / ACC: 1 0 1 7 1 0 9 2 )
✓ PHONE SUPPORT (Long Hours) 02 6552 1444 / 0407 114 112
______________________________________________________________________
STOCK SUPPLY NOTES
A note on our rare, classic, vintage, collectable, and used musical instrument amplifier & musical instrument equipment items. While we offer a warranty on your purchase, because we run on very tight profit margins (meaning cheaper gear - which is good for you, the buyer), it also means that you need to make sure you actually want the items for their incredible tone, durability, and lasting quality rather than perfect looks. Any returns or refunds will incur a re-stock fee of around a third the value of your (already) low purchase price so please remember that while most of our gear is excellent for the age, these items (especially our valve amplifier) are indeed rare and represent the sound of an unrepeatable era. Even though we meticulously service, test, clean, polish and warrant all our gear, there may occasionally be some residual scuffs underneath or on the sides, or perhaps a tiny tolex rip on the rear. So, while our gear will be in EXCELLENT CONDITION (for the age), we will always advise you if the gear is in MINT CONDITION or if we feel that the item is perhaps of only AVERAGE CONDITION.
______________________________________________________________________
* Footswitches, Cables, etc available if originally supplied to us by the donor
______________________________________________________________________
20/03/2024 NOTE: OUR DONOR ADVISES THIS VERY EARLY UNIT IS ONE OF THE BEST MOST BRUTAL THAT HE EVER OWNED - SERIAL NUMBER: 00-05557001
USA Made | Durable Construction | Brutal Sound | 240vAU
★ ORIGINAL USED | RARE BRUTAL CLASSIC ★ FREE FREIGHT | 1-YEAR Classic USED WARRANTY | LIMITLESS LAYBY | PAYPAL & MORE PAYMENT OPTIONS | NO INTEREST EVER Finance available.
∎ ORIGINAL USED | RARE CLASSIC - AWESOME U.S.A. MADE CLASSIC (Minimal Stock - 240v)
______________________________________________________________________
AN ABSOLUTE TOTAL MONSTER
An absolute total monster. The Peavey® 5150™MkI is the result of an extensive research and development project with guitar legend Edward Van Halen to produce the ultimate ROCK & ROLL guitar amplifier. You’re ready to experience super rock crunch, harmonic-rich sustain, and screaming metal drive like you’ve never heard from another amp.
______________________________________________________________________
THE PEAVEY® 5150™MkI AMP
The Uncontested Sound Of Metal. It's the tone that made history.
The 5150™ lets you experience 120W of smooth crunch and dense harmonics. 5 - 12AX7s in the preamp and 4 - 6L6s in the power amp provide all the gain and tone you'll need. Includes high and low gain inputs, and the 2 channel preamp is switchable on the front panel or footswitch. The rhythm channel features pre/post gain controls and bright/crunch switches. Lead channel has controls for pre/post gain only. Channels share 3-band EQ, presence, and resonance controls. Switchable post EQ effects loop. 16, 8, or 4 ohms with preamp output. Footswitch included.
The 5150™ series amplifiers and enclosures are the result of extensive research and development with guitar legend Edward Van Halen to produce the ultimate products for guitarists. With the 5150™MkI and 5150™MkII heads, you'll experience super rock crunch, harmonic-rich sustain, and screaming drive like you've never heard before. The production models were identical to those Van Halen used when recording & touring.
Peavey® 5150™MkI 240v 2-Channel - 120watt Head OPERATING MANUAL .PDF
https://assets.peavey.com/literature/manuals/80302108.pdf
______________________________________________________________________
AMP HEAD OVERVIEW:
▸ Six 12AX7 Pre-Amp & Four 6L6GC Power-Amp Tubes
▸ 120watts RMS into 16, 8 or 4-Ohm Switchable
▸ Ch1 Rhythm / Ch2 Lead Footswitchable Channel Select
▸ Rhythm Channel Footswitchable Bright-to-Crunch-Boost
▸ Rhythm Channel Bright Switch
▸ Three-Band EQ (Across Both Channels)
▸ Pre-Amp Output
▸ Effects Loop
▸ Bias Test Point
▸ Footswitch* (*Included - if originally donored)
▸ 240volts Australian Mains Power
______________________________________________________________________
SPECIFICATIONS:
▸ Amp Power: 120watts RMS
▸ Ohmage: 16, 8 or 4-Ohm Switchable
▸ Vacuum Valve Tubes: Four 6L6 Power-Amp Tubes & Six 12AX7 Pre-Amp Tubes
▸ Graphic Equalizer: Shared 3-Band Active EQ Controls on Each Channel (Rhythm & Lead) Bass / Middle / Treble across Channels
▸ Attitude: Shared Resonance & Presence Controls across Channels
▸ Rhythm Channel: Pre-Gain & Post-Gain Controls, as well as Bright/Crunch Switches
▸ Lead Channel: Pre-Gain & Post-Gain Controls
▸ Front Input: 1 x High Gain Guitar Input Socket (¼" / 6.5mm TRS Mono Phono Jack) Requires Electric Guitar Instrument Cable
▸ Front Input: 1 x High Normal Guitar Input Socket (¼" / 6.5mm TRS Mono Phono Jack) Requires Electric Guitar Instrument Cable
▸ Rear Outputs (Speaker): 120w RMS / 44v RMS @ 4Ω Min. (2 x ¼" / 6.5mm TRS Phono Jacks) Requires Requires Speaker Cables
▸ Rear Output (Pre-Speaker): Pre-Amp Output (¼" / 6.5mm TRS Phono Jack) Requires Speaker Cable
▸ Rear Out/Inputs: Effects Loop Send & Return (2 x ¼" / 6.5mm TRS Phono Jacks) Requires Electric Guitar Instrument Cables
▸ Other Rear: Bias Test Point & GND Switch
▸ Voltage Input: 240voltAC IEC Input Socket to Type "I" Wall Socket (220v-230v / 240v∿ / 50-60Hz / 400w) Cable Included
▸ Footswitch: Peavey® 2-Channel Multi-Purpose 2-Button Stereo Footswitch (Labelled 1 & 2 with LED's & 15ft Right Angle ¼" Inch Cable)
▸ Fuse: F3.15A / 250V
▸ MPN: 00716160
______________________________________________________________________
MEASUREMENTS:
Unpacked:
Weight - 48.30 lb (21.91 kg)
Width - 26.5" (67 cm)
Height - 10.3" (26 cm)
Depth - 11.9" (30 cm)
Packed:
Weight - 57.00 lb (25.85 kg)
Width - 13.25" (33.5 cm)
Height - 28.75" (73 cm)
Depth - 14" (35.5 cm)
______________________________________________________________________
PEAVEY® - We Are Innovation. Amplified.
Driven by an unmatched legacy of innovation and a total dedication to quality and reliability, Peavey Electronics embodies the pursuit of perfection in music and audio. It's our unifying spirit. It's proven - and it continues today.
For nearly five decades, Peavey has blazed its own path toward musical perfection. Founded by Hartley Peavey in 1965 as a one-man shop, today Peavey Electronics Corporation is one of the largest makers and suppliers of musical instruments, amplifiers and professional audio systems in the world—distributing more than 2,000 products to more than 130 countries.
Hartley has famously said, "In order to be better, by definition you must be different." What makes Peavey different is a commitment to approaching business with a unique vision, from product design to distribution to being the largest independently owned manufacturer in the business. His quest has led to more than 180 patents and innovations in the way we hear and play music.
Hartley Peavey is not only the visionary, lead engineer and chief executive, but also the lynch pin that connects a rich history to a bright future. And his founding principles of quality, reliability and innovation are still the focus of engineering and manufacturing operations that span continents and languages, customs and cultures.
______________________________________________________________________
PEAVEY ELECTRONICS - CORPORATION HISTORY
Company Perspectives
Since its founding in 1965, our company goal has always been to build the best products available while at the same time making them affordable through the use of the most modern computer-assisted design manufacturing methods available.
Company History
The Peavey Electronics Corporation, founded in 1965 by Hartley Peavey, is a major manufacturer of guitars, amplifiers, speakers, electronic keyboards, and other electronic audio-enhancement equipment. In 1993, the company, solely owned by Hartley, then chairman, and Melia Peavey, his wife and president of the company, had sales estimated at $210 million. Exports to more than a hundred countries accounted for an estimated 40 percent of sales. Peavey® Electronics, with more than 1,600 different products, is also the tenth largest manufacturer in Mississippi, with more than a million square feet of warehouse and manufacturing space in east-central Mississippi, including a 40-acre headquarters site known as Peavey City in Meridian. The company also has manufacturing operations in Foley, Alabama, and in Corby, England, and distribution centres in The Netherlands and Canada. Its chief competitor is Yamaha, the Japanese conglomerate. Founder Hartley Peavey, whose "hometown boy makes good" story made him a local legend in Mississippi, has been the recipient of numerous awards for entrepreneurship, including the "E Star" award for success in international markets from the U.S. Department of Commerce. He was also inducted into Hollywood's "Rock Walk of Fame" in 1990 for his contributions to rock 'n' roll music.
Musical Ambitions in the 1950s
Hartley Peavey grew up in Meridian, Mississippi, and had early aspirations of becoming a rock 'n' roll guitar player. As a teenager in the late 1950s, he worked in the Peavey Melody Music Store, owned by his father, J.B. "Mutt" Peavey, and tinkered with building amplifiers for local musicians. When, as he once confessed to Inc. magazine, he turned out to be a "pretty lousy guitarist," Peavey decided his future was in making amplifiers.
In 1965, after graduating from Mississippi State University with a degree in marketing and management, Peavey, then 23, took the remaining $8,000 in his college fund and formed Peavey® Electronics, working out of his parents' basement. As he later recalled in "Music and Sound's Greatest Hit," published by Peavey Electronics for its 25th anniversary: "I would build one (amplifier) a week, go out and sell it, come back and start on another one." The amplifiers were inscribed with the lightning bolt logo that Peavey had designed as a college freshman.
A year later, Peavey moved the business from the family's basement to an attic in the building that had housed his father's music store. By then, his father had sold the music store but still owned the building. Peavey also hired his first employee, a salesman, so he could concentrate on building amplifiers.
In the mid-1960s, however, there were many larger, better-known companies making amplifiers, and Peavey soon expanded into building public address systems to keep his young business afloat. In the company's 25th anniversary retrospective, Peavey explained that as "I travelled and talked to music dealers, I realised there was no shortage of instrument amplifiers. But if you wanted a PA system there were essentially only two available and both were expensive systems.... Most folks think I got into the music business with guitar amps. Not necessarily so!"
Staying in Meridian
By 1968, business was good enough that Peavey decided to borrow $17,500 to build a small "factory" in Meridian. Over the next five years, Peavey Electronics enlarged the building seven times, and having grown to more than 150 employees, in 1973 the company began construction on Plant #3, which would become its main manufacturing facility. To hire enough skilled employees, Peavey Electronics established training courses at Meridian Community College.
Over the years, Peavey was often asked about his decision to keep the company in Meridian. In 1985, he told Inc. that Mississippi "unfortunately runs dead last in everything. You don't have the skilled people you need, you don't have the suppliers, you don't have the access to the freight network.... Back in 1965, when I got into this, I was too damn dumb to know it couldn't be done." He went on to say that he had "lost count" of how often he wished he had built Peavey Electronics somewhere else. In a later interview with his hometown newspaper, The Meridian Star, Peavey explained, "What I tried to say in the Inc. article was that Mississippi presented many difficulties in starting a high-tech business. And some of these difficulties exist to this day." In 1982, the City of Meridian honoured its hometown industrialist by proclaiming April 21 as Hartley Peavey Day.
In the late 1980s, when the company was considering building its first U.S. manufacturing facility outside of Mississippi, then-Governor Ray Mabus worked with Peavey Electronics and Meridian Community College to create The Meridian Partnership, the first private-sector use of the Job Skills Education Program, a technology and basic-skills program originally developed by the U.S. Army. In the early 1990s, Peavey Electronics opened a 58,000-square-foot training centre, complete with its own recording studio, for its employees and more than 1,200 dealers. In 1993, Peavey told The News in Boca Raton, Florida, where he and his wife had a second home, "People ask me why Mississippi and I say, Where do you think rock 'n' roll was born?"
Vertical Integration in the 1970s
It was in the early 1970s that the company began the vertical integration that would make it unique among major electronic musical equipment manufacturers. Unable to purchase reliable speaker components for its high-power amplifiers, Peavey Electronics began making its own loudspeakers. Eventually, Peavey Electronics would build everything it needed for its musical instruments, from cabinets and metal work down to making its own circuit boards and running its own advertising agency.
In 1990, Peavey explained, "If somebody local had been able to subcontract for me the things I needed to build amplifiers, I would probably still be using subcontractors. We had to learn to make our own chassis, our own circuit boards, and eventually everything 'in-house.' And while we thought it was a tremendous disadvantage, and in many ways, it was, we discovered that it was the best thing that could have happened."
In the mid-1970s, Peavey Electronics also began manufacturing electric guitars, again more from necessity than design. Several leading electronic instrument companies were gobbled up by conglomerates during the 1960s, including Fender Musical Instruments, which was purchased by CBS in 1964. These companies, with their immense marketing power, began encouraging dealers to sell their guitars and amplifiers as a package deal, cutting into sales of Peavey amps.
As he had when he adopted solid-state components for his first amplifiers, Peavey embraced state-of-the-art technology to produce guitars at lower cost, becoming the first manufacturer to use computer-controlled machinery to turn out guitar bodies and precision parts. Years later, Peavey recalled, "When we announced that we were making guitar bodies on computer-controlled machinery, some of the most prominent names in the industry said, 'Impossible. Everybody knows you can't make guitars with a computer.' That was a rather simplistic attitude, we thought, because, in fact, we weren't making guitars on computers. We were using ...computer-controlled machines to make precision guitar parts to tolerances that heretofore manufacturers couldn't even think about approaching. Guitar makers are always talking about hand craftsmanship. What hand craftsmanship is, in many instances, is the ability to fit together parts that are produced with a lot of 'slop' in them."
In the early 1990s, Peavey Electronics would establish a Computer-Integrated Manufacturing (CIM) system to link and track all aspects of its manufacturing, and increasingly the company was using robotics in its assembly processes. The company, however, had an unofficial no-layoffs policy and employees whose jobs were eliminated by technology were retrained for other positions. In 1994, Jere Hess, then director of public relations, told The Meridian Star, "No one in this company has ever lost their job because of automation."
Twenty-Fifth Anniversary
When Peavey Electronics celebrated its 25th anniversary in 1990, The Meridian Star published a 40-page special edition to honour the company that had become the area's largest employer. The newspaper noted that Peavey Electronics created more than 1,000 new jobs in east-central Mississippi between 1980 and 1989, including more than 850 in the Meridian area, and 73 percent of all new manufacturing jobs in Lauderdale County. Among those saluting the company was Mayor Jimmy Kemp, who said, "Of course the obvious things you think about when somebody in your community employs 1,850 people is the enormous impact it has on your city, which is fantastic. I'd hate to think what we'd do without Peavey Electronics as far as our city is concerned." Peavey Electronics was then the tenth largest manufacturing employer in the state.
In 1991, Peavey Electronics was one of 20 companies selected by the U.S. Department of Commerce to participate in a five-year program designed to stimulate export of U.S. products to Japan. As part of the program, the Department of Commerce arranged meetings between heads of the U.S. companies and Japanese officials, including Prime Minister Toshiki Kaifu and Minister of International Trade and Industry Eiichi Nakao. Peavey Electronics, which first entered the Japanese market in the mid-1970s in a short-lived relationship with industrial giant Yamaha Corporation, also agreed to participate in at least one trade show a year in Japan. Although the company contracted with other distributor, Japan was never a significant market.
In 1991, President George Bush chose Peavey Electronics as the site to give a speech on economic growth. The Meridian Star noted, "Hoping to pump fresh air into his sagging popularity, President Bush hailed the success of Meridian's Peavey Electronics Co. as proof that Americans can excel in a worldwide economic battle." The newspaper also quoted Peavey as stating that the company's "one real goal, perhaps unreachable, is to become a $1 billion company." At the time, Peavey Electronics was reported in the local media to have sales approaching $500 million a year, although company executives said that figure was greatly exaggerated. As a matter of policy, the privately held company did not release financial information, but annual sales in the mid-1990s were generally believed to be about $200 million to $220 million.
______________________________________________________________________
A Brief History of Peavey Amplifiers –
A Legacy of Quality & Affordability
The story of how Peavey became one of the largest audio manufacturers in the world is one of humble beginnings and a well-deserved reputation for quality, value and innovation. Growing up as a guitar or bass player, you’ve probably owned or played your fair share of Peavey amps, since the company’s catalogue is so affordable, diverse and well distributed.
After graduating from Mississippi State in 1965, Hartley Peavey started his company above his father’s music store, building amps one at a time. Since then, Peavey has proven to be a pioneer in all facets of solid-state and tube-driven amplification, which has led to the design of some of the world’s best and best-selling amplifiers, including the Bandit and the 5150®.
Not only is the company passionate about sound, it is equally passionate about build quality and affordability. Peaveys are known for their innovative circuitry, being built like tanks and for being affordable enough for musicians at every level, across the globe.
Humble Beginnings
In 1961 Hartley Peavey made his first amplifier and adorned it with the instantly recognisable company logo, which he designed himself in high school. When he launched the company four years later, Peavey produced only two amplifiers: The Musician and Dyna Bass. Both models were high-wattage, solid-state amplifiers that included simple features for the working musician.
In 1973, Peavey began development on a series of vintage Fender Twin inspired amps, with 6L6 power tubes and two 6C10 pre-amp tubes. These amps had a different sonic signature than the Twin and had their own unique sound. Since solid state was all the rage back in the 1970s, later versions capitalized on new technology, which enabled the combination of solid-state pre-amps with tube power amps.
The vintage series was the precursor to the now popular all-tube Classic Series®, which features an EL84 power section that effectively combines classic Vox- and Fender-type tones in one convenient and versatile amp for use in many different styles of music.
Solid State Dominance
With solid state amps becoming increasingly popular in the ‘70s and early ‘80s, Peavey developed what is arguably its most famous solid-state amp: The Bandit®.
Conceived in 1980, the Bandit since has gone through many revisions and Bandit®s still are being produced today with Peavey’s own TransTube® technology. This innovative feature emulates the sound and feel of a tube amp using solid state power. Peavey accomplished this by modelling the overload characteristics of the amp and transformer as well as emulating the sound of asymmetrically clipping tubes.
Early model Bandits are instantly recognisable by their multi-coloured knobs and silver panels adorning the sides of the grill cloth. Varying in wattage over time, the Bandit has become a reliable tool in the solid-state amp lover’s arsenal.
More Gain for ‘80s Metal Players
When hair metal first hit in the ‘80s, players required more gain for new playing techniques, such as two-handed tapping and sweep picking. Marshall was ahead of the curve for this particular sound with the coveted JCM800 2203, but Peavey offered its take on that circuit with the Butcher and VTM series. Instead of Marshall's usual EL34 tubes, both series of Peavey amps used 6L6 power tubes, which yielded a darker sound and a less apparent upper-mid presence.
Many compare the VTM to a hot-rodded JCM800 and the Butcher to a normal JCM800, but even though these amps may share similar tonal characteristics, they are definitely their own beasts. These amps are extremely versatile and can be bought for much less than comparable competitors.
Modern Metal Mayhem
In the early ‘90s, more players began demanding even more gain, power and options, and Peavey moved to the front of the pack,via the three-channel Ultra Plus®, a currently undervalued amp.
The Ultra Plus® could cover any genre of music with its crisp-and-spanky clean channel for country; crunch channel for rock’s cutting mid-range; and ultra-channel for searing leads and metal riffs.
Using an active EQ section, the user could boost or cut any frequency with precision and dial in his own desired tone. Peavey seems to favour 6L6 power tubes, and at 120 watts this head could do the job for any situation. It was a precursor to the Triple XXX® series, which was a slightly modified version of the Ultra Plus, but it featured updated aesthetics, including a metal face plate akin to a Mesa Triple Rectifier. Peavey since has come out with the Triple XXX®II, which features switchable power tubes from the stock EL34s to 6L6s.
The Most Famous of Them All
The 5150® was unleashed in 1992 after a two-year collaboration between the creative minds of amp designer James Brown and guitarist Eddie Van Halen.
Featuring two channels, a 120-watt all-tube 6L6 power section and a shared EQ, the 5150® was able to produce a variety of rock and metal tones. The rhythm channel could be set clean or crunchy, but the lead channel is what this amp is famous for. With its super high-gain sound, it could be used for anything from tight and aggressive metal riffs to blistering lead tones. This led to the 5150®II with separate EQs for each channel, which made the amp even more versatile. In 2004, EVH parted ways with Peavey and the amp was re-branded as the 6505® and 6505®+ (also known as the 6505®Plus), along with the 6534™ and 6534™+ (also known as the 6534™Plus), which feature an EL34 power section for a more British flavour.
Since its creation, Peavey strives to make powerful, affordable amplifiers so that every musician can have the means to own one and the privilege to play through one.
______________________________________________________________________
We are the NSW Mid-North Coast Franchise Dealer for these (and more) quality musical instruments and equipment plus loads more guitar, drums, keyboard, recording, and live equipment brands
______________________________________________________________________
CONTACT US
N E W T O N E M U S I C & GUITAR TRAINING CENTRE
58 COMMERCE STREET | TAREE NSW 2430
(PH) 0 2 6 5 5 2 1 4 4 4 | (PH) 0 4 0 7 1 1 4 1 1 2
[email protected]
______________________________________________________________________
★For more than 25yrs N E W T O N E M U S I C we provide★
✓ FREE SHIPPING depot-to-depot to all states (except WA & NT).
✓ 3 YEAR Full Manufacturers WARRANTY on NEW items.
✓ 1 YEAR WARRANTY back to base NEAR NEW or USED items.
✓ LAYBY without time limits & receipts showing remaining balance.
✓ PAYPAL Safe & Secure Payment.
✓ CREDIT CARD phone MOTO & BPOINT payments accepted.
✓ BANK DEPOSIT to:
Groundwater's Guitar School Inc
58 Commerce Street, Taree NSW 2430
( BSB: 0 6 2 6 0 3 / ACC: 1 0 1 7 1 0 9 2 )
✓ PHONE SUPPORT (Long Hours) 02 6552 1444 / 0407 114 112
______________________________________________________________________
STOCK SUPPLY NOTES
A note on our rare, classic, vintage, collectable, and used musical instrument amplifier & musical instrument equipment items. While we offer a warranty on your purchase, because we run on very tight profit margins (meaning cheaper gear - which is good for you, the buyer), it also means that you need to make sure you actually want the items for their incredible tone, durability, and lasting quality rather than perfect looks. Any returns or refunds will incur a re-stock fee of around a third the value of your (already) low purchase price so please remember that while most of our gear is excellent for the age, these items (especially our valve amplifier) are indeed rare and represent the sound of an unrepeatable era. Even though we meticulously service, test, clean, polish and warrant all our gear, there may occasionally be some residual scuffs underneath or on the sides, or perhaps a tiny tolex rip on the rear. So, while our gear will be in EXCELLENT CONDITION (for the age), we will always advise you if the gear is in MINT CONDITION or if we feel that the item is perhaps of only AVERAGE CONDITION.
______________________________________________________________________
* Footswitches, Cables, etc available if originally supplied to us by the donor
______________________________________________________________________
Only 1 left!